Home > Catalog > Warewashing
Shop with Us
Dish Racks, Dollies Disposals, Disposers, Waste Drains Faucets, Assemblies
Flatware Washing, Storage Glass Washers, Racks etc. Misc Warewashing
Pre Rinse, Spray Units Sinks, Dishtables Warewashers, General
Water, Booster Heaters
Warewashing, Sinks
Sort By:
Page of 13
GW-120 HSA-10-FE HSA-10-F
The Redhead Glass Washer, upright, electric, (5) brush, (4) 7" brushes and (1) 8-3/4" brush, stainless steel base with rubber feet, brass bearings and nylon gears inside base, 1/3 HP, 4.3 amps, 115v/60/1-ph, 7' cord, NEMA 5-15P, CE Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, electronic eye gooseneck spout, basket drain, deep-drawn positive drain sink bowl, 7-1/2"High backsplash, all welded, includes mounting brackets, inverted "V" edge, NSF Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF
COMMANDER 18-6 ADMIRAL 44-4 GW-40
Commander Dishwasher, Door Type, high temperature, fully automatic, no booster, straight-thru design (field convertible to corner), approximately (65) racks/hour capacity, stainless steel frame, legs & feet, electric immersion or steam injector tank heat, RackAware™ rack sensing system, 1 HP wash motor, NSF, ETL, ENERGY STAR® Admiral Dishwasher, Conveyor Type, high temperature, no booster, single tank design (wash), CrossFire® wash system, approximately 233 racks/hour capacity, stainless steel frame, legs & feet, electric immersion or steam injector tank heat, ENERGY STAR® BarMaster Glasswasher, automatic, chemical sanitizing, (40) 20" x 20" racks per hour, auto fill, wash, drain & rinse cycles, electromechanical controls, multiple cycles, EZ-Clean™ wash & rinse arms, door safety switch, side panels, stainless steel frame, legs & adjustable bullet feet, 1 HP wash motor, NSF, ETL
300 B-0107-J B-0113
Disposer, basic unit only, 3 Hp motor, single support leg, heat treated aluminum alloy housing, UL, CSA, CE Spray Valve, with low-flow spray tip, 1.07 gpm flow rate, 7.2 Ozf spray force, self-closing, gray, EPAct 2005 compliant EasyInstall Pre-Rinse Unit, spring action gooseneck, single hole base faucet, 18" flex. stainless steel supply lines with comp. fittings for 5/8" OD copper tubing, 45"H, 14" overhang, 19-3/8" clearance, 24" riser, spray valve, stainless steel hose
FR258151 PR59314151 DRC2020180
Camrack® Flatware Rack, full size, 19-3/4" x 19-3/4" x 4", 2-5/8" max. height, soft gray, NSF Camrack® 5 x 9 Peg Rack, full size, 5 spacing & 9 spacing configuration, will hold 10" deep dish plates or pasta & soup bowls, smooth sides, round corners, ergonomic handles, 2-5/8" max. height, soft gray, NSF Camrack® Cover, fits full size rack, gray, NSF
25SWGF110 102-1151 E3S8-1620-12L18
IceExpress Water Glass Filler, 25 compartments, ABS, FDA approved, black Pre-Rinse Basket, 20"L x 20"W x 4"D, stainless steel E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E3S8-18-12L18 2B244-1D24R 3B18244-1D18L
E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF "B" Series Sink, 2-compartment, 76"W x 29-1/2"D, 16/300 stainless steel construction, 24" side-to-side x 24" front-to-back x 14" deep bowls, (1) 24" drainboard on right, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
3B244-1D24R E1S8-1620-12R18 E2S8-1620-12R18
Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E2S8-24-14L24 E3S8-1620-12T18 E3S8-18-12T18
E-Series Compartment Sink, (2) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA
1B184-1D18L 1B184-1D18R 1B18244-1D18L
Sink, (1) 18"W x 18" front to back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (1) 18"W x 18" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (1) 18"W x 24" front to back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
2B18244-1D18L 1B184-2D18 E1S8-1620-12
"B" Series Sink, 2-compartment, 58"W x 29-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 24" front-to-back x 14" deep bowls, (1) 18" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA Sink, (1) 18"W x 18" front to back x 14" deep compartments, (2) 18" drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF, CSA E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF