Home > Catalog > Warewashing > Sinks, Dishtables
Sinks, Dishtables
Sort By:
Page of 7
HSA-10-FE HSA-10-F E3S8-1620-12L18
Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, electronic eye gooseneck spout, basket drain, deep-drawn positive drain sink bowl, 7-1/2"High backsplash, all welded, includes mounting brackets, inverted "V" edge, NSF Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E3S8-18-12L18 2B244-1D24R 3B18244-1D18L
E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF "B" Series Sink, 2-compartment, 76"W x 29-1/2"D, 16/300 stainless steel construction, 24" side-to-side x 24" front-to-back x 14" deep bowls, (1) 24" drainboard on right, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
3B244-1D24R E1S8-1620-12R18 E2S8-1620-12R18
Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E2S8-24-14L24 E3S8-1620-12T18 E3S8-18-12T18
E-Series Compartment Sink, (2) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (3) 16"W x 20" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA
1B184-1D18L 1B184-1D18R 1B18244-1D18L
Sink, (1) 18"W x 18" front to back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (1) 18"W x 18" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (1) 18"W x 24" front to back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
2B18244-1D18L 1B184-2D18 E1S8-1620-12
"B" Series Sink, 2-compartment, 58"W x 29-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 24" front-to-back x 14" deep bowls, (1) 18" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA Sink, (1) 18"W x 18" front to back x 14" deep compartments, (2) 18" drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF, CSA E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E1S8-18-12 E2S8-18-12 E2S8-24-14T24
E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12"deep compartments, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 24"W x 24" front-to-back x 14" deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
1B184 314-16-3-18L 314-16-3-18R
Sink, (1) 18"W x 18" front to back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF 314 Series Sink, three compartment, 74-3/8"W x 27-1/2"D, 304 stainless steel construction, 16"W x 20" front-to-back x 13-1/2" deep compartments, 18" drainboard on left, 9-1/2"H backsplash with 1" upturn & tile edge, 8" O.C. splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized steel legs & side crossrails, adjustable bullet feet, NSF 314 Series Sink, three compartment, 74-3/8"W x 27-1/2"D, 304 stainless steel construction, 16"W x 20" front-to-back x 13-1/2" deep compartments, 18" drainboard on right, 9-1/2"H backsplash with 1" upturn & tile edge, 8" O.C. splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized steel legs & side crossrails, adjustable bullet feet, NSF
E1S8-18-12R18 E1S8-24-14L24 E2S8-18-12R18
E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (1) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E2S8-24-14R24 1B18244-1D18R 2B184-1D18L
E-Series Compartment Sink, (2) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF Sink, (1) 18"W x 24" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF "B" Series Sink, 2-compartment, 58"W x 23-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 18" front-to-back x 14" deep bowls, (1) 18" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA